august 2015 wireless charging small rx (receiving) coil units WR221230-36M8-G wireless charging
(2/4) 20150825 / wr_rx-coil-WR221230-36M8-G_en.fm ? all specifications are subject to change without notice. wireless charging wireless charging small rx (receiving) coil units features receiving coils for wireless charging. flexible sheet type is available. these coils are designed for max 2w output custom design is available based on each design requirements. halogen-free products. shape & dimensions electrical characteristics characteristics specification table WR221230-36M8-G lw dimensions (mm) thickness (mm)max. inductance (h) [100khz, 1vrms] dc resistance ( )max. [25c] part no. 2212 0.87 27.9 1.21 WR221230-36M8-G 12.0typ. 12.0typ. 22.0typ. 25.0typ. 22.0typ. 5.0typ. solder coat dimensions in mm top view side view bottom view 0.83typ. ( 087max. ) halogen-free: indicates that cl content is less than 900ppm, br content is less than 900ppm, and that the total cl and br conte nt is less than 1500ppm.
(3/4) 20150825 / wr_rx-coil-WR221230-36M8-G_en.fm ? all specifications are subject to change without notice. wireless charging ic reference info contact windows for more information ic manufacturer part no. web please contact us. country person in charge web us chris burket chris.burket@us.tdk.com eu andre carranque carranque@eu.tdk.com japan takeshi ishibashi tishiba@jp.tdk.com ta i w a n chienhung lin chienhung_lin@tw.tdk.com china chienhung lin chienhung_lin@tw.tdk.com korea youngsoo m kim youngsoo_kim@kr.tdk.com asean chienhung lin chienhung_lin@tw.tdk.com
(4/4) 20150825 / wr_rx-coil-WR221230-36M8-G_en.fm ? all specifications are subject to change without notice. wireless charging do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). before soldering, be sure to preheat components. the preheating temperature should be set so that the temperature difference between the solder temperature and product temperat ure does not exceed 150c. soldering corrections after mounting should be within the range of the conditions determined in the specifications. if overheated, a short circuit, performance deterioration, or lifespan shortening may occur. self heating (temperature increase) occurs when the power is turned on, so the tolerance should be sufficient for the set therm al design. do not use for a purpose outside of the contents regulated in the delivery specifications. the products listed on this catalog are intended for use in general electronic equipment (av equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. the products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. if you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) aerospace/aviation equipment (2) transportation equipment (electric trains, ships, etc.) (3) medical equipment (4) power-generation control equipment (5) atomic energy-related equipment (6) seabed equipment (7) transportation control equipment (8) public information-processing equipment (9) military equipment (10) electric heating apparatus, burning equipment (11) disaster prevention/crime prevention equipment (12) safety equipment (13) other applications that are not considered general-purpose applications reminders
|
